PMK
Categories
Probemart.com | Probes, current sensors & calibration sources for pulsed-power testing
Bookmark
Product Categories
- Home
- Selection Guide
-
Solutions
SiC & GaN Device Double-Pulse Testing UHV & Pulsed High-Voltage Measurement Plasma & Pulsed Power Lithography, Ion Implantation & Accelerator High Voltage Wind Turbine Generator & Transformer Efficiency Measurement EV & Renewable Energy Inverter R&D MRI Gradient Current Measurement Power Device Junction Temperature (Tj) Measurement High-Frequency & Fast Pulsed Current Grid Operation: HVDC & Solid-State Transformers Probe Knowledge Base
- Downloads
- Test Reports
- About Us
PMK
PMK HSDP2010L High-Speed Differential Probe 2.0GHz ±8V 10:1 7.5m
Brand: PMK
Origin: Germany
10:1 high-speed differential probe with 2.0 GHz (typ.) bandwidth, ±8 V differential range, ±60 V common mode and 1 MΩ ∥ 0.6 pF low loading, 7.5 m cable. Ideal for serial bus and SMPS small-signal debugging.
Downloads
Overview
10:1 high-speed differential probe with 2.0 GHz (typ.) bandwidth, ±8 V differential range, ±60 V common mode and 1 MΩ ∥ 0.6 pF low loading, 7.5 m cable. Ideal for serial bus and SMPS small-signal debugging.
Applications: high-speed serial bus debugging (USB2.0 / GbE / CAN / LIN / I2C / SPI / SATA / HDMI); SMPS and wide-bandgap device small-signal measurement; low-loading probing of sensitive circuits; 7.5 m cable reaches remote test points
Source: PMK HSDP Series Datasheet (Preliminary, 2024-05), specifications on pages 4-5
——— Related Applications ———
——— Related Products ———
PMK FireFly®FF-1500A optically isolated probe 1.3 GHz/1.5 GHz high CMRR (180 dB) high-voltage 2500 V double-pulse VGS gate /VDS drain voltage
IWATSU multi-channel high-voltage high-frequency optically isolated measurement probe Isolation SE-6000 remote UHV safety test system
CIC high-voltage differential probe DP20-20K-LVC high-precision 0.1% high-frequency isolated high CMRR 20 kV
Specifications
| Parameter | Value |
| Model | HSDP2010L |
| Attenuation Ratio | 10:1 (± 2 % at DC) |
| Bandwidth (-3 dB) | > 1.8 GHz (2.0 GHz typ.) |
| Differential Voltage Range | ± 8 V (16 Vpp) (DC + AC peak) |
| Differential DC Offset Range | ± 12 V |
| Differential Input Impedance | 1 MΩ ∥ 0.6 pF |
| Single-ended Input Impedance | 500 kΩ ∥ 1.2 pF |
| Noise (Input Referred) | |
| Rise Time (10 %-90 %) | |
| Propagation Delay | 30.5 ns |
| CMRR | DC > 70 dB; 1 MHz > 50 dB; 10 MHz > 45 dB; 100 MHz > 35 dB; 500 MHz > 25 dB; 1 GHz > 25 dB |
| Common Mode Voltage Range | ± 60 V (DC + peak LF-AC, |
| Max Non-Destructive Voltage (signal to GND) | ± 60 V (DC + peak LF-AC, |
| Differential Input Impedance | 1 MΩ ∥ 0.6 pF |
| Single-ended Input Impedance | 500 kΩ ∥ 1.2 pF |
| Input Coupling of the Measuring Instrument | 50 Ω |
| Input Connector | 2.54 mm (0.1") socketed input |
| Output Connector | BNC male (50 Ω input, or 1 MΩ with 50 Ω feed-through termination) |
| Cable Length | 7.5 m (1.3 m version also available; other lengths on request) |
| Power Supply | PS-02 (2-ch) / PS-03 (4-ch) power supply, or AP-01 battery pack (> 8 h) |
| Operating Temperature | 0 °C to +50 °C |
| Storage Temperature | -40 °C to +71 °C |
| Maximum Relative Humidity | Operating: 80 % up to +31 °C, decreasing linearly to 40 % at +50 °C; non-operating: 95 % up to +40 °C |
| Altitude | Operating: up to 2000 m; non-operating: up to 15000 m |
| Warranty | 1 year |
Expand
* Specifications are subject to change without notice.