T&M Research
Categories
Probemart.com | Probes, current sensors & calibration sources for pulsed-power testing
Bookmark
T&M Research
Categories

T&M CVR high-frequency non-inductive resistor, designed for monitoring pulse generator systems, extremely high peak power and current input generated by steady-state current loads, and transient current monitoring. In recent years, with the rapid development of power semiconductors and wide-bandgap devices, evaluation of device dynamic performance (double-pulse) requires high-precision capture of current waveforms during overall turn-on and turn-off transitions while minimizing the insertion loss of the probe itself.
Key features:
GHz measurement bandwidth, picosecond-level measurement delay;
Patented technology, extremely low inductance;
Monitors continuous signals (W) or high-energy pulses (J);
0.2% ultra-high resistance accuracy;
Maximum power dissipation of 2–3 W per unit;
Universal BNC connector
——————————————————————————————
Actual product photo:
Main models have two appearances (as shown above),SDN has two pins,SSDN has a nut.
—————————————————————————————
Typical applications:
Pulsed current applications
Calibration laboratories
Current sensing for phase meters
Single-phase angle indicator V-A
Three-phase angle indicator V-A
Power factor meter
High-frequency wattmeter
Broadband power meter
Power analysis
Current transformer calibration
Current probe phase delay characterization
SCR current measurement
Current control for automatic welding machines
Automotive alternator output measurement
Fault current detection to determine alternator bearing wear
Electron-beam welding
Current detection in knock systems
Three-phase fault testing in transmission substations
Fault detection in modulators
Measurement of lamp current in laser systems
IGBT chopper current control in electric vehicles
Circuit breaker testing
—————————————————————————————————————
Widely used in double-pulse testing of SiC/GaN wide-bandgap semiconductors
——— Related Applications ———
——— Related Products ———
PMK FireFly®FF-1500A optically isolated probe 1.3 GHz/1.5 GHz high CMRR (180 dB) high-voltage 2500 V double-pulse VGS gate /VDS drain voltage
IWATSU multi-channel high-voltage high-frequency optically isolated measurement probe Isolation SE-6000 remote UHV safety test system
CIC high-voltage differential probe DP20-20K-LVC high-precision 0.1% high-frequency isolated high CMRR 20 kV
2 Watt Units - 1 7/8 Inch Case
Model |
Resistance (ohms) |
Bandpass MHz. |
Risetime nsec. |
Emax joules |
SDN-001 |
0.001 |
12 |
30 |
12 |
SSDN-001 |
0.001 |
12 |
30 |
12 |
SPT-001 |
0.001 |
12 |
30 |
12 |
SDN-0025 |
0.0025 |
12 |
30 |
28 |
SSDN-0025 |
0.0025 |
12 |
30 |
28 |
SPT-0025 |
0.0025 |
12 |
30 |
28 |
SDN-005 |
0.005 |
400 |
1 |
3 |
SSDN-005 |
0.005 |
400 |
1 |
3 |
SPT-005 |
0.005 |
400 |
1 |
3 |
SDN-015 |
0.015 |
1200 |
0.3 |
1.5 |
SSDN-015 |
0.015 |
1200 |
0.3 |
1.5 |
SPT-015 |
0.015 |
1200 |
0.3 |
1.5 |
SDN-10 |
0.1 |
2000 |
0.18 |
2 |
SSDN-10 |
0.1 |
2000 |
0.18 |
2 |
SPT-10 |
0.1 |
2000 |
0.18 |
2 |
3 Watt Units - 3 Inch Case
Model |
Resistance (ohms) |
Bandpass MHz. |
Risetime nsec. |
Emax joules |
SDN-25 |
0.25 |
1200 |
0.3 |
5 |
SSDN-25 |
0.25 |
1200 |
0.3 |
5 |
SPT-25 |
0.25 |
1200 |
0.3 |
5 |
SDN-50 |
0.5 |
800 |
0.45 |
2.5 |
SSDN-50 |
0.5 |
800 |
0.45 |
2.5 |
SPT-50 |
0.5 |
800 |
0.45 |
2.5 |
US precision instruments, NMR research results, patented technology, low inductance, ultra-high-precision resistors, high overload capacity, particularly suitable for pulse current monitoring; additional specifications can be customized.
For other product information and technical consultation, please scan the QR code to follow the 'Probemart' official account or contact the sales engineer.